日韩A片一级无码免费 蜜桃,成人做爰黄A片免费看三区蜜臀,北京熟妇搡BBBB搡BBBB,美女被操视频网站

當前位置:南通康誠重工機械有限公司 >> 新聞中心 >> 直線步進電機原理和應用簡介(英文)

直線步進電機原理和應用簡介(英文)


The linear stepper motor has been made flat instead of round so its motion will be along a straight line instead of rotary. A picture of a linear motor and its amplifier is shown in Fig. 11-69, and the basic parts of the linear motor are shown in Fig. 11-70. In this diagram you can see the motor consists of a platen and aforcer. The platen is the fixed part of the motor and its length will determine the distance the motor will travel. It has a number of teeth that are like the rotor in a traditional stepper motor except it is passive and is not a permanent magnet. The forcer consists of four pole pieces that each have three teeth. The pitch of each tooth is staggered with respect to the teeth of the platen. It uses mechanical roller bearings or air bearings to ride above the platen on an air gap so that the two never physically come into contact with each other. The magnetic field in the forcer is changed by passing current through its coils. This action causes the next set of teeth to align with the teeth on the platen and causes the forcer to move from tooth to tooth over the platen in linear travel. When the current pattern is reversed, the forcer will reverse its direction of travel. A complete switching cycle consists of four full steps, which moves the forcer the distance of one tooth pitch over the platen. ThTQLZ系列振動清理篩e typical resolution of a linear motor is 12,500 steps per inch, which provides a high degree of resolution. The typical load for a linear motor is low mass that requires high-speed movements.


FIGURE 11-69 A linear motor and its a振動分級篩mplifier.


FIGURE 11-70 The forcer is shown on 錘破機top of the platen of a linear motor. The electromagnets are identified on the forcer.

Theory of Oper振篩ation

The forcer consists of two electrom重型錘式破碎機agnets that are identified in Fig. 11-70 as magnet A and magnet B and one permanent magnet. The permanent magnet is a strong rare-earth permanent magnet. The electromagnets are formed in the shape of teeth so that their magnetic flux can be concentrated. In the diagram you can see that the forcer has four sets of teeth and these teeth are spaced in quadrature so that only one set of teeth is aligned with the teeth on the platen at any time.

When current is applied to the coil (field winding) of the electromagnets, their magnetic flux passes through the air gap between the forcer and the platen, causing a strong attraction between the two. The magnetic flux from the electromagnets also tends to reinforce the flux lines of one of the permanent magnets and cancels the flux lines of the other permanent magnet. The attraction of the forces at the time when peak齒輥式破碎機 current is flowing is up to ten times the holding force.

When a pattern of energizing one coil and then another is established, the resulting magnetic field will pull the motor in one direction from one tooth to the next. When current flow to the coil is stopped, the forcer will align itself to the appropriate tooth set and create a holding force that tends to keep the forcer from moving left or right to 刮板輸送another tooth. The linear stepper motor controller sets the pattern for energizing and de-energizing the field coils so that the motor moves smoothly in either direction. By reversing the pattern, the direction the motor travels is reversed.

Figure 11-71 shows a block diagram of the linear stepper motor controller. From this diagram you can see that it has a microprocessor that interfaces with a digital-to-analog converter, a force angle modifier, and a p慣性振動器ower amplifier. It also has a power supply for the amplifiers and it may have an accelerometer amplifier as an option. The microprocessor has ROM and EPROM memory to store programs.


FIGURE 11-71 A block diagram of a linear motor co振動粉碎機ntroller.

Applic裝車輸送機ations

The applications for a linear motor tend to be straight-line motion. These types of applications are slightly different from traditional stepper motor applications where the rotary motion is converted to linear motion with a ball and screw, rack and pinion, or other method. Figure 11-72 shows the linear motor used in a coil winding positioner application. The linear motor in this application is teamed with a servomotor that controls the speed of the coil winding mechanism. The linear motor determines the exact location of the next coil that is added to the spool. The speed of the linear motor can be increased or decreased when the machine is spooling larger-diameter or smaller-diameter wire. The ability of the linear motor to provide small incr粉體輸送設備emental steps makes it a good match for this application.


Figure 11-73 shows a sec給料盤ond application where the linear motor is used to transport a semiconductor wafer through a precision laser inspection station. The linear motor provides excellent locating ability for this application.

A Compumotor L-L20-P96 system acts as the traverse element to gu篩分機ide the wire, while a Z Series servo motor rotates the spindle. Both axes are coordinated by a Compumotor 4000 indexer preprogrammed to produce a number of different coil types. Precise position control and mechanical simplicity over a long length of travel are provided by the linear motor.


FIGURE 11-72 A linear stepper motor used in a coil winding application. The linear motor is used to control the position 送料盤of the coil winder.

In this application, the linear motor acts as a transport for semiconductor wafers. The L20 linear mot清理篩or system offers increased throughput and gentle handling of the wafer.


FIGURE 11-73 A linear stepper motor used to transport a silicon semiconductor wafer through a laser inspection station.

(

 

相關資訊

相關產品

最新產品

CZ系列倉壁振動器
倉壁振動器用于防止和排除各種料倉由于物料的內摩擦、潮解、帶電、成分偏析等原因引起的“堵塞”、“塔拱”現象;亦可用于清除各種倉壁、管道粘結物料
防閉塞裝置(ZFB)
ZFB防閉塞裝置(倉壁振動器)廣泛應用于冶金、化工、建材、火電、煤炭、食品、水泥、制藥、化肥、糧食、鑄造、陶瓷、磨料等行業中貯料倉的防閉塞之用。
慣性振動器(ZG)
ZG慣性振動器廣泛用來作為各種振動機械(如振動給料機、振動輸送機、振動篩分機、振動落砂機、振動破碎機、振動提升機、振動試驗臺等)的激振源
振動電機
振動電機礦山、鑄造、冶金、煤炭、電力、糧食、港口、化工、建材、機械、陶瓷等工業部門的理想配套設備

最新資訊

隨機鏈接

振動熱料輸送機

無軸螺旋輸送機

煤矸石粉碎機

濕料粉碎機

大傾角帶式輸送機

大傾角皮帶機

南通康誠重工機械有限公司   地址: 江蘇省海安縣開發區南海大道(東)8號 網址: http://skoda-zd.com

電話:0513-80686000  88773999 傳真:0513-80686060

 聯系人: 吳先生 13506276000(24小時服務熱線) E-mail:info@ntscjx.com 技術支持:天正企劃

分享到:
蜜桃忘忧草久久久精品 | 91成人网在线观看 | 台湾三级丰满少妇在线观看 | 少妇在家紫薇喷水在线观看 | 成人小说图片视频直播 | 亚洲裸舞亚洲裸無 | 人妻毛片一级AV片 | 国产精品久久久久久久久免费看 | 作者不详中文字幕中文一区 | 码18 免费视频 | 精品一区二区三区AV刺激动漫蜜臀 | 亚欧洲精品在线视频 | 2021午夜福利视频 | 亚洲AV无码传区国产乱码唯美清纯 | 黄色一级视频网站 | 久久国语一牛一区影视 | 久久亚洲AV永久无码精品成人 | 成人AV免费一区二区三区 | avtt天堂网东京热系列 | 久久五月天午夜视频在线播放 | 国产裸体美女永久免费无遮 | 伊人直播女神裸体网站在线观看 | 四川少妇BBB搡BBB嗓视频 | 国产日韩在线一区二区三区 | 苍井空一级婬片A片 | 丰满岳乱妇一区二区三区 | 艳妇乳肉豪妇荡乳AV无码福利 | 亚洲国产精品成人无码专区 | 亚洲AV无码成人精品区一本婷婷 | 手机在线观看国产黄色电影 | 国产中文字幕一区在线观看 | 成人片全裸直播在线观看 | 久久久久亚洲AV | 久久久久久免费免费麻辣 | 99精品在线播放 | 国产在线拍揄自揄拍无码视频 | 国产伦精品一区二区三区免费迷奷 | 韩国一级视频中文字幕 | 91精产国品一二三区在线观看 | 国产无码高清在线观看 | 91大神人妻论坛性趣 |